Xantrex Freedom SW3024 24v Inverter Charger

Xantrex SW3024 24v 3000W Inverter Charger

Model: 815-3024

Pure sine wave output in two 24-volt

Parallel stacking capability to double the inverter power output

Series stacking capability enables operation of 240 Vac applications

Advanced configuration options for customized applications*

Built-in transfer switch automatically transfers between inverter power and incoming AC power

Power factor corrected, multi-stage charger for fast, efficient charging

Temperature compensated charging for a vareity of climate conditions

Ignition lockout feature helps prevent unnecessary battery drain when the alternator is not providing power**

Wide operating temperature range

Conformal coated circuit boards for humid environments

Dual input / Dual output AC interface (3000W model)

Compatible with the Xantrex Automatic Generator Start*** (Part# 809-0915)

Meets CSA, UL458 (with marine supplement), ABYC and FCC Part 15, Class B requirements

The NEW Freedom SW 24 Vdc inverter/charger is packed with features and it is one of the most advanced inverter/chargers in the market today. The Freedom SW features premium sine wave output with high surge capability and temperature compensated, power factor corrected, multi-stage charging to meet power needs of demanding loads including inductive motor loads.

The Freedom SW inverter/charger provides utility grade AC power to operate commonly used AC-powered electronics such as plasma television sets, microwaves, entertainment systems, computers, printers, power tools, refrigerators and much more.

The Freedom SW offers SERIES and PARALLEL stacking capability to enable twice-the-rated output and operation of 240 Vac applications respectively. Both models are compatible with optional accessories such as the System Control Panel and the Automatic Generator Start.

*A System Control Panel is required for all system configuration and setup**When used with the remote panel***Sold separately

Specifications
Output power (continuous at 40 degC)

3000 W
Surge rating (5 seconds)	6000 W
Peak output current	75 A
Output frequency	60 Hz +/- 0.2 Hz
Output voltage	120 Vac
Output wave form	Pure sine wave
Optimal efficiency	94%
No-load power draw (inverting)	< 1.5 Adc
Input DC voltage range	20 - 32 Vdc
AC connections	Split phase in / dual out
Electrical specifications charger
Output current (continuous at 25 degC)	75 A
Output voltage	24 Vdc
Output voltage range	12 - 32 Vdc
Charge Control	3 stage with manual equalize
Charge temperature compensation	Remote battery sensor (included)
Efficiency	> 85%
AC input power factor (maximum charge)	0.95 typical
Input current (for maximum charging)	22 A rms nominal
Input AC voltage	120 Vac
Input AC voltage range	85 - 140 Vac
Dead battery charge	> 12 Vdc
General Specifications
Compatible battery types	Flooded / Gel / AGM
Transfer relay rating	2 legs at 30 A each
Transfer time (AC to inverter and inverter to AC)	< 20 ms
Operating temperature range (full power)	- 4 degF to 104 degF (- 20 degC to 40 degC)
Storage ambient temperature range	- 40 degF to 185 degF (- 40 degC to 85 degC)
Unit dimensions (H x W x L)	7.75 x 13.5 x 15.25 in (197 x 343 x 387 mm)

What's in the Box:

SW3024

Documentation

battery Temperature sensor

DC terminal covers (one red, one black) with two sets of #6-32 screw

Xanbus network terminator x 2

5/16 in-18 nuts and washers for the DC terminals x 2

InstallationManual

OwnersManual

DataSheet