Raymarine RSW Smart Wind Transducer Short Arm 30m Cable

Raymarine RSW Wired, Smart Wind transducer with 30m Cable

Model: E70670

Raymarine Smart Wind technology delivers expert level accuracy without the need for additional, expensive processors or extensive calibration and set-up.

Through rigorous wind tunnel testing, we've fine-tuned and balanced the instrument to ensure that data from the mast head is accurate and consistent.

Trusted, high-accuracy True Wind data combined with the Alpha Performance Displays and Axiom Chartplotters let you sail smarter.

The RSW Wired, Smart Wind transducer is a professional-level wind sensor designed to deliver highly accurate calibrated wind speed and direction data. Supplied with a 30m Smart Wind mast cable as standard.

Specifications
Length

Wind transducer (including cable): 657.762 mm (25.90 in)
Width	Wind transducer: 46.96 mm (1.85 in)
Height	Wind transducer: 305.86 mm (12.04 in)
Power
Nominal supply voltage	12 V dc (via SeaTalk NG)
Operating voltage range	9 V to 16 V dc
Power Consumption	< 100 mW
Fuse rating	Ensure that the SeaTalk NG backbone is protected by a 5 A fuse
NMEA 2000 LEN (Load Equivalency Number) - based on nominal 9 V rating:	1
Environmental
Operating temperature range	-25 degC to +55 degC (-13 degF to +131 degF)
Storage temperature range	-30 degC to +70 degC (-22 degF to +158 degF)
Relative humidity	Masthead: 100%
Waterproof rating	Wind transducer: IPx6/IPx7
Wind	115 mph (185 kph)
Vibration	EN 60945:2002 (exposed)

What's in the Box:

No.10 x 3/4 self tapping screws x 4 (for mounting the wind transducer)

No.7 x 3/4 in self tapping screws x 2 (for mounting the gateway)

40 mm (1.57 in) heat shrink tube (required to insulate ground wire when shortening the mast cable)

Ring crimp terminal (required for additional ground connection when the gateway is not mounted on a metal surface)

Mast cable